Problem: RAK received a call regarding a critical issue with an active leak on a drip leg at a customer’s facility. Initial efforts to address the leak using traditional methods like tapping, injections, and composite materials were unsuccessful. Despite multiple...
Problem: A 32" to 20" reducer on a service water line was identified to have a small leak at the 9 o'clock position. The operating pressure of the system was 30 psi. The leak posed a risk of further deterioration and potential failure of the reducer, which could...
Problem: A critical pipeline experienced a failure necessitating immediate repair. After RAK's team removed the old skinner clamp and thoroughly cleaned the pipe, they discovered the pipe's condition was too deteriorated for the new 10-inch stock clamp to create a...
Problem: A customer at a coke plant has a 42" Coke Oven Gas Main that was experiencing <75% wall loss in the vapor space of the main due to high volume ammonia. There were significant leaks on the entire piping system. At A Glance Cost to replace $1.5MM without...
Problem: RAK Industrial Services received an urgent call regarding a potentially hazardous situation: an active high-pressure steam leak in the steam header at a client’s warehouse. The steam leak posed significant risks, including potential damage to equipment,...
Problem: RAK was contacted by a customer with a critical need for a tank repair due to leakage issues. The leaks were impacting operations and potentially causing environmental concerns. Immediate action was required to address and restore the tank's integrity. At A...
Problem: RAK received a service request from a customer regarding a significant hole on the side of a blower unit. The hole compromised the blower's structural integrity and operational efficiency, posing a risk of prolonged downtime and potential production losses....
Problem: RAK received an urgent request from a customer to repair an active leak on an AC cooling line. The plant needed a swift and effective repair to minimize downtime and avoid compromising the AC system. At A Glance The repair needed to be performed from a...
Problem: An industrial manufacturing plant experienced significant wear and tear on its facility's walls and floors, leading to cracks and surface degradation. To maintain operational efficiency and safety standards, the plant required a comprehensive repair and...
Problem: RAK received a call from a customer regarding multiple gas leaks that posed safety risks and needed to be addressed immediately to avoid downtime. The pipe had old, deteriorating brackets that required removal, and previously made fiberglass repairs had...